Motorized (Electric) Chassis

Chassis increased motorized operating functions, which is the necessary hardware infrastructure to realize the intelligent switchgear, procedures, remote control, etc. Electric mechanism by motor vehicle chassis installation is divided into vertical and horizontal structures, both of which are installed in the original chassis manually, without changing the shape of the original manual chassis dimensions, interlock function, manual / electric are facilitate to change. GPV- □ /DD2 electric mechanism because the motor is vertical, shall be inserted into the circuit breaker mechanism box, versatility is not strong, but a wide range of motor selection, low prices, and the motor replacement is also convenient. Motor GPV-□ /DD3 electric mechanism for the special micro-motors, use the extra space to install the chassis, do not change the original chassis dimensions, it has strong versatility.

Motorized chassis is to provide a drive scheme, and how to control and protect the electric chassis is required with the corresponding control module to realize and meets the requirements, the control module has the following features:

1. Meet the basic control requirements of chassis racking in and shake out, as well as interlock requirement of the circuit breaker, earthing switches, etc.

2. Motor over-current protection, over-current can be adjusted.

3. Overcurrent return function, when the motor is overcurrent, can return to test position, can also choose a half circle return.

4. Overtime protection function, the control module will stop automatically if the chassis into position signal not be detected within a setting time.

1. Firstly, you must first clear the specification and model of the original manual chassis.

2. Select the motor-drive mechanism, and add / DD2 or / DD3 after the original model.

3. Specify the control voltage AC / DC 220 or AC / DC110.

4. If you have special requirements, please consultation with Green Power